Kannu International

• HP METWIRE NB Penetrates to the core, providing inner strand preservation and lubricity.
• Reduces down time.
• Lubricates and protects every strand from corrosion.
• Adheres to surface forming an outer film to protect against corrosive conditions. Won’t attack rubber, neoprene sheave liners or bull rings.

The Mobil Rarus™ 800 Series is a line of supreme performance air compressor lubricants primarily intended for the lubrication of severe duty reciprocating air compressors but not recommended for air compressors used in breathing air applications. They are engineered to meet or exceed the stringent requirements of the major compressor manufacturers. They are formulated with design-specific synthetic base-oils and a high technology additive system that assures exceptional equipment protection and reliability for compressors operating under conditions where mineral-oil based products are not meeting expectations. Mobil Rarus 800 Series provides excellent wear protection and outstanding resistance to oxidation and thermal degradation, greatly superior to mineral oils. Their unique formulation provides the ability to help reduce maintenance costs through minimising equipment problems and downstream deposits and carryover.

Mobil Rarus 800 Series lubricants significantly reduce the potential for fires and explosions, compared to mineral oil-based products. They exhibit a virtual absence of deposit formation and higher autogenous ignition temperatures improving both performance and safety. Their exceptional water separating characteristics reduce problems with emulsion formation and carryover into downstream piping and equipment. They are recommended or approved by many of the leading compressor manufacturers.

The use of the Mobil Rarus 800 Series oils can result in cleaner compressors and lower deposits compared to conventional mineral oils, resulting in longer running periods between maintenance intervals. Their excellent oxidation and thermal stability safely allow extended life capability while controlling sludge and deposit formation. They possess outstanding anti-wear and corrosion protection, which enhances equipment life and performance.
The Mobil Rarus 800 Series oils are recommended for single and multistage air compressors, but are not recommended for air compressors used in breathing air applications. They are particularly effective for continuous high temperature operation with discharge temperatures up to 200ºC. They are suitable for reciprocating and rotary type machines with the lower viscosity grades mainly used in rotary compressors. Rarus 800 Series oils are recommended for units with a history of excess oil degradation, poor valve performance or deposit formation. They are compatible with all metals used in compressor construction and with mineral oil-based lubricants but admixture will detract from their performance capabilities. Mobil Rarus 800 Series oils are compatible with seals made from fluorinated hydrocarbon, silicone, fluorosilicone, polysulfide, Viton, Teflon, and high nitrile Buna N NBR (above 36% acrylonitrile) materials. Materials not recommended include low nitrile Bune N NBR (below 30% acrylonitrile), natural and butyl rubbers, Neoprene, polyacrylate, styrene/butadiene and chlorosulfonated polyethylene.

A product we invented over 150 years ago, and one we have been reinventing ever since. The Valvoline™ family of motor oil has a formula perfect for your vehicle’s needs. Search through our wide range of options to find the best motor oil for your vehicle.
Advantages:
Unique Dispersive Polymer Technology (DPT) with premium Group II base oil, provides advanced soot control and cold start protection.
Valve train wear protection and reduced oil filter restriction at high soot levels.
High temperature deposit control, including single and two-piece pistons and ring/liner wear protection.
Higher TBN level for long-life performance.
Balanced formulation that helps maximize engine durability.
Extensive testing in Cummins engines, including stationary and on-road EGR engines.

Castrol is here to serve every driver, every motorcyclist and every industry on earth. We do this through Liquid Engineering. That means creating high performance oils, lubricants, fluids and greases for every application you can imagine.

petroleum oils used in industry and homes for the lubrication of machinery (machines, instruments, and so on). Baku, Emba, and eastern types of crude oil are used in their production. Industrial oils sometimes contain vegetable oils (for example, castor, mustard, or rapeseed) as additives, as well as antioxidizing, thickening, and anticorrosive dopes for improving their service qualities. The range of industrial oils is constantly being varied and supplemented with new brands, particularly synthetic oils (for example, silicon, polyester, and fluorohydrocarbon).

Industrial oils are subdivided according to viscosity into light, medium, and heavy types. Light oils, with viscosity of 5–10 centistokes (1 centistoke = 10⁻⁶ m²/sec) at 50°C and pour points as low as –25°C, are used for lubricating high-speed, low-load machinery. This group includes L (velosite) oil and T (petrolatum) oil, which are used for lubrication of spinning and doubling frames in the textile industry, for spindles of metal-working lathes and low-power high-speed motors; separator oil L, for lubrication of light-duty separators; sewing oil for sewing, binding, and knitting machines; and instrument oil MVP (pour point –60°C), for lubricating monitoring and measuring instrumentation. Medium industrial oils, with viscosity of 10–50 centistokes at 50°C and pour points as low as— 30°C, are used to lubricate machinery operating at medium speeds and under medium loads. This group includes spindle and machine lubricating oils, separator oil T, and telegraphic oil. These oils are used in many sectors of industry (light industry, metalworking, and so on), primarily for lubricating bearings in low-power electric motors and in hydraulic systems of metalworking machines. Heavy industrial oils, with viscosity of 10–30 centistokes at 100°C and relatively high pour points, are used for lubricating industrial equipment operating at low speeds and under heavy loads—for example, forge and press equipment and worm and tooth gearing.

Good producet of industries

A BEST-IN-CLASS MACHINE TOOL SLIDEWAY OIL Shell Tonna S3 M is Shell’s top-performing oil specially designed for the lubrication of machine tool slides, tables and feed mechanisms. With excellent frictional properties, very good slideway adhesion and excellent anti-wear performance, it can be relied on to provide efficient machining accuracy and reliable protection for your equipment, especially in highprecision, low-speed machines and combined lubrication systems. It features highly refined mineral oils and special additives to enhance the crucial property of adhesion and reduce stick–slip.
Every part of your machine or process has been meticulously engineered, so you want to use a lubricant that has been designed to ensure that your equipment is well protected and works efficiently. The Shell Tonna range of slideway oils has been developed to enable equipment operators to select the oil that will deliver optimum value to their operations through n wear and corrosion protection n long oil life n system efficiency
Designed to protect Protecting components from damage can help to increase your equipment’s service life and maximise your return on investment. Shell Tonna S3 M has been formulated to help protect your slideways, gears, bearings and hydraulic system components from corrosion and wear. In the industrystandard test it achieved
Designed for long oil life Shell Tonna S3 M has good slideway adhesion characteristics, which restrict its leakage into the cutting fluid sump and reduce consumption. It also helps to maintain uniform working conditions for your machine.
Real-world value delivery A wide variety of customers has unlocked value by moving to a higher quality machine tool slideway oil. For instance, some have n increased machining precision and eliminated stick–slip and jerky movement: one customer reports saving $46,0001 a year in reduced maintenance costs and lost production time n reduced oil consumption on slideway applications by up to 65% owing to the oil’s good adhesion to slideways.

Specifications and approvals Shell Tonna S3 M meets the requirements of a wide range of industry bodies and equipment manufacturers. ISO viscosity grades available: 32, 68, 220.
Applications Machine tool slideways, tables and feed mechanisms – for use on a wide range of surface materials, including cast-iron and synthetic materials Machine tool hydraulic systems – specially recommended for machines that have a combined hydraulic and slideway lubrication system Machine tool gearboxes and spindles, and gear and headstock lubrication Shell Tonna S3 M 32 and Shell Tonna S3 M 68 are intended for horizontal slide lubrication. Shell Tonna S3 M 220 is intended for vertical slides owing to its higher viscosity grade

FULL PRODUCT AND SERVICE PORTFOLIO Whatever your needs or application, we can provide a full range of oils and greases, including synthetic, high-performance products and additional services

Shell Spirax S6 AXME 75W-90

Superior performance, synthetic, fuel efficient GL-5 axle oil for many premium applications

Greater efficiency and therefore higher fuel economy Tailored frictional properties give lower power loss and hence lower operating temperatures resulting in increased mechanical efficiency.

Super high performance additives with exceptional oxidation resistance plus lower operating temperatures ensures long term gear and seal protection and longer oil life.

Excellent protection against gear wear and pitting, helps prevent premature failures. Outstanding oxidation resistance also helps prevent damage to seals due to deposit formation.

Excellent static and dynamic seal compatibility exceeding OEM requirements, which helps minimize seal leaks. The extended drain capabilities help maximize oil drain intervals resulting in less overall lubricant usage during life of the equipment.

A number of leading equipment manufacturers recognise the benefits of Shell Spirax S6 AXME 75W-90 and have formally approved it against their specifications.