Kannu International

Mobil DTE™ 20 Series oils are high performance anti-wear hydraulic oils. They meet the stringent requirements of hydraulic systems using high pressure, high output pumps as well as other hydraulic system components such as close clearance servo-valves and numerically controlled (NC) machine tools. These products met the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers, allowing use of a single product with excellent performance characteristics. Features and Benefits •  Excellent oxidation stability helps reduce maintenance downtime and costs by contributing to system cleanliness and deposit reduction, enable long oil and filter life •  Enhanced anti-wear and corrosion protection of system components using various metallurgy help extend component life and improve production capacity •  Controlled demulsibility protects systems from small and large quantities of water •  Keep clean properties reduce system deposits and sludge help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance •  Quality reserve maintains performance features even under severe service conditions and extended drain intervals Applications      •  Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products      •  Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset      •  Where small amounts of water are unavoidable

Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants.

They are formulated to deliver good performance in a range of hydraulic components used in systems subjected to moderate operating conditions.
Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants.
Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants. They are formulated to deliver good performance in a range of hydraulic components used in systems subjected to moderate operating conditions. Features and Benefits      •  Good anti-wear performance helps reduce pump wear and prolonging pump life      •  Corrosion protection helps reduce the effects of moisture on system components      •  Filterability to prevent filter blockage even in the presence of water Applications      •  Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required      •  Where hydraulic oil contamination or leakage is unavoidable      •  Where small amounts of water are unavoidable 

Mobil DTE™ 20 Series oils are high performance anti-wear hydraulic oils. They meet the stringent requirements of hydraulic systems using high pressure, high output pumps as well as other hydraulic system components such as close clearance servo-valves and numerically controlled (NC) machine tools. These products met the most rigorous performance requirements of a wide range of hydraulic system and component manufacturers, allowing use of a single product with excellent performance characteristics. Features and Benefits •  Excellent oxidation stability helps reduce maintenance downtime and costs by contributing to system cleanliness and deposit reduction, enable long oil and filter life •  Enhanced anti-wear and corrosion protection of system components using various metallurgy help extend component life and improve production capacity •  Controlled demulsibility protects systems from small and large quantities of water •  Keep clean properties reduce system deposits and sludge help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance •  Quality reserve maintains performance features even under severe service conditions and extended drain intervals
Applications      •  Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products      •  Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset      •  Where small amounts of water are unavoidable      •  Systems containing gears and bearings      •  Machines employing a wide range of components using various metallurgy

Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants. They are formulated to deliver good performance in a range of hydraulic components used in systems subjected to moderate operating conditions. Features and Benefits      •  Good anti-wear performance helps reduce pump wear and prolonging pump life      •  Corrosion protection helps reduce the effects of moisture on system components      •  Filterability to prevent filter blockage even in the presence of water Applications      •  Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required      •  Where hydraulic oil contamination or leakage is unavoidable      •  Where small amounts of water are unavoidable 

Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants.

They are formulated to deliver good performance in a range of hydraulic components used in systems subjected to moderate operating conditions.
Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants.
Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants. They are formulated to deliver good performance in a range of hydraulic components used in systems subjected to moderate operating conditions. Features and Benefits      •  Good anti-wear performance helps reduce pump wear and prolonging pump life      •  Corrosion protection helps reduce the effects of moisture on system components      •  Filterability to prevent filter blockage even in the presence of water Applications      •  Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required      •  Where hydraulic oil contamination or leakage is unavoidable      •  Where small amounts of water are unavoidable

Mobil™ Hydraulic AW Series oils are good quality anti-wear hydraulic oils intended for industrial and mobile service applications, subjected to moderate operating conditions and requiring anti-wear lubricants. They are formulated to deliver good performance in a range of hydraulic components used in systems subjected to moderate operating conditions. Features and Benefits      •  Good anti-wear performance helps reduce pump wear and prolonging pump life      •  Corrosion protection helps reduce the effects of moisture on system components      •  Filterability to prevent filter blockage even in the presence of water Applications      •  Systems using gear, vane, radial and axial piston pumps and those containing gears and bearings where mild anti-wear characteristics are required      •  Where hydraulic oil contamination or leakage is unavoidable      •  Where small amounts of water are unavoidable

Features and Benefits •  Excellent oxidation stability helps reduce maintenance downtime and costs by contributing to system cleanliness and deposit reduction, enable long oil and filter life •  Enhanced anti-wear and corrosion protection of system components using various metallurgy help extend component life and improve production capacity •  Controlled demulsibility protects systems from small and large quantities of water •  Keep clean properties reduce system deposits and sludge help protect equipment and extend equipment life, reduce maintenance costs and improve total system performance •  Quality reserve maintains performance features even under severe service conditions and extended drain intervals Applications      •  Hydraulic systems critical to deposit build-up or where sludge and deposits form with conventional products      •  Hydraulic systems requiring a high load-carrying capability and anti-wear protection, and when thin oil-film corrosion protection is an asset      •  Where small amounts of water are unavoidable      •  Systems containing gears and bearings      •  Machines employing a wide range of components using various metallurgy 

SERVOHYDREX 32, TH46, 100


DESCRIPTION Servohydrex oils are anti-wear type hydraulic oils having a very high viscosity index and low pour point. These oils are blended with high quality base stocks and are incorporated with oxidation inhibitor and anti-rust additives to give long trouble free service. The defoamant additive prevents build-up of foam in the hydraulic system. Servohydrex oils have special anti-wear additive essential for certain hydraulicequipment used for heavy duty operations.

APPLICATION Servohydrex oils are recommended as fluid media in all hydraulic systems where very low operating temperatures are encountered and the application demands use of a very high viscosity index oils.

 PERFORMANCE BENEFITS • Easy flow at very low temperatures • Suitable for a wide range of operating temperatures due to its very high viscosity index • Provide good protection against wear thereby prolonging service life of moving parts • Possess excellent resistance to oxidation • Have reduced foaming tendency • Provide protection against rust andcorrosion

APPROVALS • Servohydrex TH 46 is approved by TELCO forTata Hitachi excavators. • Servohydrex 100 is approved by L&T for use inPoclain excavators. 

GRADES AVAILABLE - SERVOSYSTEM 22/32/46/57*/68/81*/100/150

DESCRIPTION Servosystem oils are anti-wear hydraulic and circulation oils specially formulated for efficient lubrication of a wide variety of industrial equipment. Servosystem oils are blended from highly refined base stocks and carefully selected antioxidant, anti-wear, anti-rust and anti-foam additives. PERFORMANCE STANDARDS • IS: 10522:1983 ( Reaffirmed 1993 ) MANUFACTURERS APPROVAL • Bharat Pumps & Compressors Ltd., Naini • Hindustan Machine Tools Ltd., Bangalore • Kirloskar Bros. Ltd., Pune • HeavyEngg. Corporation, Ranchi • Revathi CP Equipments APPLICATION Servosystem oils are recommended as fluid media for hydraulic systems and hydraulic pumps even under severe operating conditions in stationary and mobile equipment. These oils are also recommended for circulation, splash, bath and ring oiling systems of the bearings (both plain and

APPLICATION Servosystem oils are recommended as fluid media for hydraulic systems and hydraulic pumps even under severe operating conditions in stationary and mobile equipment. These oils are also recommended for circulation, splash, bath and ring oiling systems of the bearings (both plain and anti-friction) and gears of industrial machinery that require a long life lubricant. These oils can be used for chain drives and compressor crankcase lubrication. They are not suitable for lubrication of turbines and silver or silver coated components in any equipment.

PERFORMANCE BENEFITS Servosystem oils • Provide good wear- protection, thereby prolonging service life of moving parts • Possess high film strength properties which help minimise friction and wear • Provide rust-protection, to reduce the incidence of corrosion • Have excellent resistance to oxidation thereby giving long service life • Have reduced tendency to foam thereby minimise the chance of noisy operation and erratic actuator response

PERFORMANCE STANDARDS • IS: 10522:1983 ( Reaffirmed 1993 ) MANUFACTURERS APPROVAL • Bharat Pumps & Compressors Ltd., Naini • Hindustan Machine Tools Ltd., Bangalore • Kirloskar Bros. Ltd., Pune • HeavyEngg. Corporation, Ranchi • Revathi CP Equipments 

- after inhalation - after contact with skin : Assure fresh air breathing. If you feel unwell, seek medical advice. : Remove contaminated clothing and shoes. Wash skin thoroughly with mild soap and water. Never use kerosine or gasoline for cleaning the skin. : Rinse immediately with plenty of water. Seek medical attention if irritation develops. : Do not induce vomiting. Seek medical attention immediately. : If injected under the skin when using high pressure equipment, send casualty immediately to a hospital, even when there are few or no symptoms. - after contact with the eyes - after ingestion - after injection Most important symptoms and effects, : Symptoms of overexposure to vapours include drowsiness, weakness, headache, dizziness, both acute and delayed nausea, vomiting, dimming of vision. Indication of any immediate medical : High-pressure hydrocarbon injection injuries may produce substantial necrosis of underlying attention and special treatment needed tissue despite an innocuous appearing external wound. Often these injuries require extensive emergency surgical debridement and all injuries should be evaluated by a specialist in order

Anti-wear (AW) hydraulic oils are made from a petroleum base fluid and commonly contain the anti-wear additive Zinc dialkyldithiophosphate (ZDDP). This additive works to protect the hydraulic pump. They come in multiple viscosity grades that have varying applications. For example, AW 46 hydraulic oils can be used to operate the hydraulic systems in off-road equipment such as dump trucks, excavators, and backhoes, while AW 32 hydraulic oils may be more suitable for colder weather applications like in a snow plow's pump                                                                     
The primary function of a hydraulic fluid is to convey power. In use, however, there are other important functions of hydraulic fluid such as protection of the hydraulic machine components. The table below lists the major functions of a hydraulic fluid and the properties of a fluid that affect its ability to perform that function

ENKLO FRDU grades are fire resistant hydraulic fluids based on organic ester. These fluids meet the HF-DU classification system as per European Mines Safety Commision. These fluids can replace phosphate esters in high temperature applications and are recommended as control governor fluids for steam and gas turbine. They do not have any seal compatibility issues which are inherent in phosphate ester fluids. The same seals used with mineral oils can be used with ENKLO FRDU 46.
These fluids not only provide improved safety as compared to mineral oil but offer superior lubricity and antiwear properties as compared to invert emulsion (FRIE) fluids and also mineral oil based hydraulic fluids. While changing over from invert emulsion to FRDU based fluids care must be taken that there is no residual fluid or moisture present in the system. If necessary the line may be flushed with mineral oil to ensure that no traces of invert emulsion fluid remains in the system.

ENKLO FRDU grades are fire resistant hydraulic fluids based on organic ester. These fluids meet the HFDU classification system as per European Mines Safety Commision. These fluids can replace phosphate esters in high temperature applications and are recommended as control governor fluids for steam and gas turbine. They do not have any seal compatibility issues which are inherent in phosphate ester fluids. The same seals used with mineral oils can be used with ENKLO FRDU 68. These fluids not only provide improved safety as compared to mineral oil but offer superior lubricity and antiwear properties as compared to invert emulsion (FRIE) fluids and also mineral oil based hydraulic fluids. While changing over from invert emulsion to FRDU based fluids care must be taken that there is no residual fluid or moisture present in the system. If necessary the line may be flushed with mineral oil to ensure that no traces of invert emulsion fluid remains in the system. ENKLO FRDU 68 is also approved by Director General Of Mines and Safety Dhanbad on a permanent basis. The product is also bio degradable

Superdraulic is a range of high performance anti wear Hp Enklo 68 Hydraulic Oil 210 Ltr. They have been formulated usinghighly refined base oils fortified with zinc anti wear, oxidation corrosion inhibitors and anti foam additives.This produces a highly thermally stable fluid capable of handling high loads and high temperatures. TheSuperdraulic range is available in ISO grades.

Superdraulic is compatible with most pumps, valves, and seal materials. However, like all hydraulic oils containing zinc anti wear additives, it is not suitable for use with pumps having silver plated parts (e.g.some Lucas units).

BENEFITS:-

Improved equipment life and decreased downtime due to superior wear and corrosion protection.

Enhanced chemical and thermal stability provide long fluid life and permit higher operating temperatures

Excellent air release and antifoam properties to prevent cavitation and oxidation

Excellent filterability even when contaminated, thereby preventing filter blockages. This saves filter replacement costs and down time

Enhanced low frictional characteristics to prevent the occurrence of "stick slip"

STORAGE:-
All packages should be stored under cover to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60 DegreeC.

SERVOSYSTEM HLP (N) 22, 32, 46, 68, 100, 150


DESCRIPTION ServosystemHLP(N) oils are high performance hydraulic oils. These oils provide superior antiwear protection, excellent oxidation and thermal stability, outstanding hydraulic stability and good demulsibility. Servosystem HLP (N) oils also possess superior filterability characteristics. These oils provide problem free service and have been found to be far superior in performance compared to other commercially available anti-wear, heavy duty hydraulic oils. PERFORMANCE STANDARDS Servosystem HLP (N) oils are formulated to meet the following specifications : # DIN 51524 Part 2 # DENISON HF-O # US STEEL 127 # IS : 11655-1986(Reaffirmed 1991) # IS:10522-1983 (Reaffirmed 1993) ServosystemHLP(N) oils are recommended by the leading equipment manufacturers such as : # AtlasCopco (India) Ltd. APPLICATION Servosystem HLP (N) oils are recommended as a fluid media in hydraulic systems, operating under extremely severe conditions. These oils are recommended for sophisticated high performance electro-hydraulic or numerically controlled systems. Servosystem HLP (N) oils are also recommended for lubrication of screw compressors requiring oil of excellent thermal stability and low CCR value. These oils are not suitable where the components are of silver or silver coated
PERFORMANCE BENEFITS Servosystem HLP (N) oils # ensure long service life due to outstanding oxidation and thermal stability. # provide sludge fee high temperature performance. # provide excellent filterablity characteristics. # readily separate from water because of excellent demulsibility characteristics. # provide superior long term protection against rust and corrosion. # Ensure overallproblem free performance

SERVOSYSTEM HLP 22, 32, 46, 68, 100, 150
DESCRIPTION Servosystem HLP oils are high performance hydraulic oils. These oils provide superior antiwear protection, excellent oxidation and thermal stability, outstanding hydraulic stability and good demulsibility. Servosystem HLP oils also possess superior filterability characteristics. These oils provide problem free service and have been found to be far superior in performance compared to other commercially available anti-wear, heavy duty hydraulic oils.

APPLICATION Servosystem HLP oils are recommended as a fluid media in hydraulic systems, operating under extremely severe conditions. These oils are recommended for sophisticated high performance electro-hydraulic or numerically controlled systems. Servosystem HLP oils are also recommended for lubrication of screw compressors requiring oil of excellent thermal stability and low CCR value. These oils are not suitable where the components are of silver or silver coated.

PERFORMANCE BENEFITS Servosystem HLP oils # ensure long service life due to outstanding oxidation and thermal stability. # provide sludge fee high temperature performance. # provide excellent filterablity characteristics. # readily separate from water because of excellent demulsibility characteristics. # provide superior long term protection against rust and corrosion. # Ensure overall problem freeperformance.

PERFORMANCE STANDARDS Servosystem HLP oils are formulated to meet the followingspecifications : # DIN 51524 Part 2 # DENISON HF-O # US STEEL 127 # IS : 11656-1986 (Reaffirmed 1991) # IS:10522-1983(Reaffirmed 1993) # ATLAS COPCO R8 & R9, HOESCH HLP Servosystem HLP oils are recommended by the leading equipment manufacturers such as : # AtlasCopco (India) Ltd. 

Resists oxidation in presence of air, water and copper therefore offering good oil life and deposit control in hydraulic systems. · Good anti-wear performance · Formulated with proven anti-wear technology to be effective throughout the range of operating conditions, including low and severe duty high load conditions to protect components like pumps etc. Good air release and anti-foam properties · Good surface properties to ensure quick air release while ensuring foam control in the system. Good water separation · Good demulsibility to resist formation of water-in-oil emulsions and prevent consequent damage to pump and hydraulic system cleanliness: Meets cleanliness requirement of ISO 4406 class 21/19/16.
Specifications, Approvals & Recommendations ISO 11158 (HM fluids) · DIN 51524 Part 2 HLP type · For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk. Compatibility & Miscibility Compatibility · Shell Hydraulic S1 M fluids are suitable for use with most Hydraulic pumps. However, please consult your Shell representative before using in pumps containing silver plated components. Fluid Compatibility · Shell Hydraulic S1 M fluids are compatible with most other mineral oil based Hydraulic fluids. However, mineral oil Hydraulic fluids should not be mixed with other fluid types (e.g. environmentally acceptable or fire resistant fluids). Seal & Paint Compatibility · Shell Hydraulic S1 M fluids are compatible with seal materials and paints normally specified for use with mineral oils

HP Enklo 68 Hydraulic Oil is a type of hydraulic fluid, typically used in industrial and machinery applications. Hydraulic oils like HP Enklo 68 are essential for powering hydraulic systems and ensuring smooth operation by transferring energy and lubricating components within the system.

Servosystem oils are premium quality anti- wear type lubricants formulated with superior quality of hydro treated base stock. They provide long service life and are recommended for hydraulic and circulation systems of wide variety of equipments. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipments having silvercoated components. These oils pass Vickers V-1O4C vane pump test and meet IS: 10522-1983 (Reaffirmed 2004

Servosystem oils are premium quality anti- wear type lubricants formulated with superior quality of hydro treated base stock. They provide long service life and are recommended for hydraulic and circulation systems of wide variety of equipments. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipments having silvercoated components. These oils pass Vickers V-1O4C vane pump test and meet IS: 10522-1983 (Reaffirmed 2004 )

Servo system oils are premium quality anti- wear type lubricants formulated with superior quality of hydro treated base stock. They provide long service life and are recommended for hydraulic and circulation systems of wide variety of equipment. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipment having silvercoated components. These oils pass Vickers V-1O4C vane pump test and meet IS: 10522-1983 (Reaffirmed 2004) and IPSS 1-09-002 specifications.

 ENKLO 32,46,57,N 68,100,121,150,176,220,320,460(ANTIWEAR TYPE) ENKLO OILS DESIGNED FOR USE IN CIRCULATING SYSTEMS ARE MADE FROM HIGH VISCOSITY INDEX, CHEMICALLY STABLE BASE STOCKS WHICH ARE FURTHER FORTIFIED WITH ANTIOXIDANTS, ANTICORROSION, ANTIWEAR AND ANTIFOAM ADDITIVES,. THEY MEET THE REQUIREMENTS OF VERY HIGH PRESSURE SYSTEMS AND ALSO OF SYSTEMS WHERE HIGH PUMP SPEEDS ARE ENCOUNTERED. ENKLO GRADES POSSESS THE FOLLOWING CHARACTERISTICS :-RIGHT VISCOSITY TO SATISFY THE DEMANDS OF THE HYDRAULIC PUMP AND THE DESIGNED SYSTEM.-HIGH VISCOSITY INDEX TO RESTRICT VISCOSITY CHANGES UNDER OPERATING CONDITIONS. -GOOD FILM STRENGTH AND ANTIWEAR PROPERTIES TO MINIMISE WEAR OF PUMPS, VALVES, CYLINDERS, PISTONS ETC.-MAXIMUM DEMULSIBILITY TO ALLOW ENTRAINED WATER TO SETTLE DOWN. -EXCELLENT CORROSION RESISTANCE TO PREVENT RUSTING AND CORRSION OF METAL PARTS. -RESISTANCE TO FOAMING TO ENSURE PROMPT AND EFFICIENT FUNCTIONING. -HIGH CHEMICAL STABILITY TO ENSURE LONG AND TROUBLE FREE SERVICE LIFE. ENKLO 32,46,68,100,150 MEETS THE REQUIREMENTS OF IS : 10522 – 1983 (REAFFIRMED 1993) SPECIFICATION AND USS 127. ENKLO GRADES PASS VICKERS V-104 C VANE PUMP TEST AND MEET IPSS : 1-09-022. ENKLO GRADES ARE RECOMMENDED FOR USE IN HYDRAULIC SYSTEMS, ENCLOSED GEAR BOXES, CHAIN DRIVES, COMPRESSORS, A VACUUM PUMPS, MINING MACHINERY, MACHINE TOOLS, HYDRAULIC AND CIRCULATION SYSTEM AND ENCLOSED GEAR BOXES WHICH DO NOT REQUIRE EP TYPE LUBRICANTS. CONT

Product Description Gulf Harmony AW series are high performance anti-wear hydraulic oils developed for high pressure hydraulic systems operating under moderate to severe conditions in mobile and industrial service. These oils are formulated with high quality base oils and carefully selected performance additives to provide excellent protection against oxidation degradation, rust & corrosion and wear. They also possess superior foam control, water separation and rapid air release properties. They exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) & ISO 11158 HM and majority of the international OEMs viz. Denison, Fives Cincinnati (MAG IAS, LLC) & Eaton (Vickers).

Features & Benefits  Excellent thermo-oxidative stability controls the formation of sludge & varnish and improves oil life  Exceptional anti-wear property results in longer pump and component life and reduces costs  Superior demulsibility helps in faster separation of water from oil and resists formation of emulsions  Special rust & corrosion inhibitors protect multi-metallurgy components even in presence of moisture  Rapid air release property minimises chances of pump cavitation leading to trouble free operations  Compatible with multi-metals and sealing materials commonly used in hydraulic systems
 Applications ISO VG 10 through VG 100  Hydraulic systems operating under moderate to severe conditions in mobile and industrial service  Older hydraulic systems where leakage is a problem and a cost-effective hydraulic oil providing allround protection is required  Mobile hydraulic fluid power transmission systems and general machine lubrication ISO VG 150  Recommended for a wide variety of following industrial applications requiring anti-wear type of oils:  Circulating oil systems  Plain and rolling element bearings  Gear sets  General Machine lubrication