Kannu International

Servo Gear HP oils are extreme pressure automotive gear lubricants. These oils are blended from selected base stocks and contain additives to provide extreme pressure, anti-rust-corrosion characteristics

Spirax S2 A 80W-90 is blended for use in a wide variety of automotive axle units subjected to heavy duty conditions

Comprehensive components

Specially selected additives impart good anti-wear, anti-rust characteristics and oxidation stability.

High quality base oils

Maintains low temperature flow in the

Health and Safety

Shell Spirax S2 A 80W-90 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.

Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.

Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from 

Protect the Environment

 

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Advanced synthetic heavy-duty marine gear oil offering outstanding viscosity index and low-temperature fluidity, low foaming tendency and extended compatibility with seals and paints.

An excellent anti-oxidation synthetic polyalkylene glycol gear lubricant for operating temperatures up to 200°C or steel-on-bronze applications 

High-quality, extreme-pressure (EP) oils for the lubrication of heavy-duty marine gearboxes. Their high load carrying capacity, protection against micropitting and compatibility with seals and paints combine to offer excellent performance in enclosed gear applications. (Specific grades are approved by Siemens AG for use in Flender, helical, bevel, planetary and marine gear units.)
Viscosity at 40°C, mm²/s Viscosity at 100°C, mm²/s Flash point, °C Pour point,°C Density at 15°C, kg/m³ Shell Omala S2 GX 68 68 8.7 >230 –27 885 Shell Omala S2 GX 100 100 11.3 >230 –24 891 Shell Omala S2 GX 150 150 14.8 >240 –24 897 Shell Omala S2 GX 220 220 19.0 >240 –18 899 Shell Omala S2 GX 320 320 24.2 250 –15 903 Shell Omala S2 GX 460 460 30.6 >250 –12 904 Shell Omala S2 GX 680 680 42.1 >250 –9 912

Shell Spirax S3 AX 80W-90 A high-performance API GL-5 gear and axle oil for moderate to heavily loaded gear applications requiring SAE 80W-90 oil. Shell Spirax S4 ATF HDX A superior-quality automatic transmission fluid suitable for heavy duty transmissions. Shell Spirax S4 TXM A premium “universal transmission oil” designed for use in transmissions, hydraulic systems, oil-immersed brakes and other ancillary systems. Viscosity at 40°C, mm²/s Viscosity at 100°C, mm²/s Flash point, °C Pour point,°C Density at 15°C, kg/m³ Shell Spirax S3 AX 80W-90 169 16.8 220 –30 900 Shell Spirax S4 ATF HDX 33 7.2 152 –48 847 Shell Spirax S4 TXM 60 9.4 220 –42 882

Product Description Mobilgear 600 XP Series are extra high performance gear oils having outstanding extreme pressure characteristics and load-carrying properties, intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. Mobilgear 600 XP Series is designed to stay ahead of the changing needs of gearbox technology. Gearbox technology design trends are towards smaller units with similar power throughput. This increase in power density places increased demands on gear oils. Mobilgear 600 XP Series oils are formulated to meet the stress by providing extra protection for gears, bearings and seals. Mobilgear 600 XP Series is formulated to protect gear teeth from wear at its earliest stages. Microscopic wear, called micropitting, can lead to significant gear tooth damage. Mobilgear 600 XP Series exceeds the industry requirement for bearing wear protection. In fact, Mobilgear 600 XP Series provides up to 15 times the wear protection as measured by the industry standard FAG FE 8 test. Mobilgear 600 XP Series' balanced formulation is able to provide maximum wear and corrosion protection while maintaining compatibility with common gearbox seal materials. Mobilgear 600 XP helps to maintain gearbox seal integrity thereby preventing oil leaks and keeping contamination out. By protecting the gears, bearings and seals, Mobilgear 600 XP can improve equipment reliability and increase productivity. Mobilgear 600 XP Series oils are recommended for industrial spur, helical and bevel enclosed gears with circulation or splash lubrication, operating at bulk oil temperatures up to 100ºC. They are particularly suitable for gear sets working under heavy or shock loads. Mobilgear 600 XP oils also find broad application in marine gearing applications. They may also be used in non-gear applications include highly loaded and slow speed plain and rolling contact bearings.
Features and Benefits Mobilgear 600 XP Series products are a leading member of the Mobil brand of industrial lubricants that enjoy a reputation for innovation and high performance capability. These mineral-based products are designed to provide high quality industrial gear oils, meeting the latest industry standards and with high versatility to lubricate a broad range of industrial and marine equipment. Mobilgear 600 XP Series products offer the following features and potential benefits:
 

Servo Gear Super oils are automotive extreme pressure multi-gear oils blended from specially selected high viscosity index base stocks and contain additives which impart extreme pressure, anti-rust, anticorrosion and anti oxidation characteristics. This is multi-purpose type gear lubricants specifically formulated to meet the rigorous service demand of commercial fleet mechanical transmissions, axles and gear
boxes.

 HYTAK 0,1,5,F3,F4,F5 THESE ARE HEAVY VISCOUS BLACK PETROLEUM PRODUCTS FORTIFIED WITH SPECIAL TACKINESS AGENTS. THEY ALL HAVE PRONOUNCED STRINGINESS AND EXCELLENT FILM STRENGTH TO WITHSTAND HIGH PRESSURE ENCOUNTERED IN HEAVILY LOADED OPEN GEAR. THEY ALSO POSSESS GOOD RUST PREVENTIVE PROPERTIES AND HAVE ABILITY TO STAY IN PLACE AND PROVIDE LONG LASTING PROTECTION TO ROPES AND OPEN GEARS. HYTAK 1,2,5,MEET IS:6554-1980 GRADES 2,3,&4 SPECIFICATIONS RESPECTIVELY. THESE GRADES ARE RECOMMENDED FOR LUBRICATION OF CONVENTIONAL OPEN GEARS, CABLE AND WIRE ROPES, THE HEAVIER GRADES REQUIRE HEATING BEFORE APPLICATION AND IN LIQUID STATE THEY CAN BE APPLIED WITH SWAB, BRUSH, PADDLE OR SPRAY. HYTAK F GRADES CONTAIN A NON- FLAMMABLE SOLVENT FOR EASY APPLICATION WITHOUT HEATING.

Long oil life - maintenance saving · Shell Omala S4 GX is formulated using an advanced additive system in combination with specially selected synthetic base fluids to provide outstanding resistance to breakdown over long duration and/or high temperature operation. Shell Omala S4 GX can operate successfully at bulk temperatures up to 1200C. Shell Omala S4 GX offers the potential to significantly extend service intervals compared to conventional industrial gear oils.

Excellent wear and corrosion protection · Shell Omala S4 GX is formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions. These features provide benefits over mineral oil-based products in terms of gear and bearing component life. Shell Omala S4 GX also has excellent corrosion protection, even in the presence of contamination by water and solids.

Maintaining system efficiency · Shell Omala S4 GX can help maintain or enhance the efficiency of industrial gear systems through improved low temperature performance and lower friction in comparison to mineral oil-based products. This provides better lubrication at low start-up temperatures.

Other applications · Shell Omala S4 GX oils are suitable for lubrication of bearings and other components in circulating and splashlubricated systems. For geared systems, or Other applications that employ a filtration unit finer than 5 microns, please consult your Shell Local Technical Advisor and Product Application Specialist before using Shell Omala S4 GX. For highly loaded worm drives the Shell Omala “W” series oils are recommended. For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.  

Servomesh SP oils are premium quality industrial gear lubricants having excellent thermal and oxidation stability, good demulsibility, low foaming tendency and provide rust and corrosion protection to metal surfaces. Servomesh SP oils meet AGMA standard 250.04, ASLE standard G-315, G-1000, G-1500, G2150, IS:8406-1993, US Steel requirement No. 222 and 224 and IPSS:1-09-003 specifications. Servomesh SP 68, SP 100, SP 150, SP 220, SP 320, and SP 460 also meet Cincinnati Machines specifications No. P-63, P – 76, P - 77, P – 74, P - 59 and P-35 respectively. Servomesh SP oils are recommended for all heavy-duty enclosed gear drives with circulation or splash lubrication system operating under heavy or shock load conditions up to a temperature of 1000 C. These oils can also be used for plain and roller bearings, sliding surfaces, chain drives, sprockets, flexible couplings employing splash, circulation or spray lubrication systems requiring EP  

DESCRIPTION Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties. 

PARTHAN EP 68,100,150,220,257,320,460,680,1000 THESE ARE PREMIUM QUALITY OILS MANUFACTURED FROM HIGH QUALITY BASE STOCKS FORTIFIED WITH EXTREME PRESSURE ADDITIVES, ANTIFOAM, ANTIRUST, AND ANTIOXIDATION AGENTS; THEREBY THEY HAVE EXCELLENT OXIDATION RESISTANCE AND THERMAL STABILITY. PARTHAN EP GRADES CONTAIN PHOSPHOROUS AND SULFUR AS EXTREME PRESSURE AGENTS. THESES ARE NON – CORROSIVE TO COPPER AND COPPER ALLOYS. PARTHAN EP GRADES MEET IS : 8406 – 1993, USS 224, AGMA STANDARD 250.04,DIN 51 517 PART 3, IPPSS 1-09-003-82 AND CININNATI MILACRON P-63,P-77,P-35 PARTHAN EP GRADES ARE APPROVED BY ABB – ABL PROJECTS FOR THEIR VARIOUS EQUIPMENTS, RECOMMENDED BY MAJOR GEAR BOX MANUFACTURES LIKE FMG, SHANTI GEAR BOX,ETC THESE OILS ARE RECOMMENDED FOR ALL HEAVY DUTY ENCLOSED GEAR DRIVES WITH CIRCULATION OR SPLASH LUBRICATION SYSTEM OPERATING UNDER HEAVY OR SHOCK LOAD CONDITIONS, PAIN AND ANTIFRICTION BEARING SUBJECTED TO SHOCK AND HEAVY LOADS, PARTHAN EP GRADES GIVE DEPENDABLE PERFORMANCE FOR CONTINUOUS SERVICE AT OPERATING TEMPERATURE UP 110C. PARTHAN EP OILS ARE ALSO SUITABLE FORF SPRAY LUBRICATION SYSTEMS REQUIRING EXTREME PRESSURE PROPERTIES. CONT…

HP GEAR OIL XP 80W-90 is multipurpose gear oil containing extreme pressure additives for moderate as well as severe conditions service.

Performance benefits:

• Excellent thermal & chemical stability
• Protection against rust & corrosion ensuring longer trouble free protection
• Good performance even under extreme pressure & varying load conditions

Application

 

Application areas are hypoid differential & drive axles and manual transmissions of automobiles.

 

Meets or Exceeds Requirement Of

• API GL-5
• MIL-L 2105 D
• EP Type GL – 5 Level of IS: 1118:1992 (Re-affirmed 2011) specifications

Established in the year 2019, Kannu International (India) is one of the prominent Manufacturer of Electro-Discharge Machine Oils, Lubricating Oil many more.  We have developed a sound warehouse facility at our premises, which enables us to carry out our business related tasks in a prominent manner. To store our products systematically, we have segregated our warehouse into different segments.